MRL Elevator

Product Detail

FUJIHD is MRL elevator manufacturer and suppliers in china, specialized in the research, development and production of fuji MRL elevator .

 

1. Introduction

Machine roomless elevator is an elevator that does not require a building to provide a closed special machine room for the installation of an elevator driving host, control cabinet, speed limiter and other equipment. The MRL elevator is not a simple local improvement of traditional elevators, but a major change in elevator technology. This is because some of the key technologies it USES will be applied to other elevator products, which will lead to technological advances in the entire elevator industry.

 

2. The features of the machine roomless elevators are as follows:

1) the main engine, driving cabinet and control cabinet of the machine roomless elevator are installed in the well road, and there is no need for special machine room. Compared with the traditional elevator, it has a great advantage in appearance.

2) machine roomless lift running luxury configuration, high reliability, and it makes it suitable for all kinds of high-grade offices, star hotels, hotels, hospitals, convention and exhibition center, fashionable residential area, etc.

? Its outstanding advantages are as follows:

1) green environment, no need for elevator room, save space, save cost.

2) low vibration, low noise, stable and reliable.

3) efficient and energy-saving.

4) easy installation and maintenance.

 

3. Specification

Standard MRL passenger elevator Technical Data Sheet

Capacity KG	Speed m /s	Car dimension CW *CD *CH (m m )	Door size JJ*H H (m m )	Shaft size				Max floor	Max. travel height TH(m )
				shaft w idth* shaft depth AH *BH (m m )	overhead O H (m m )	pit depth PD (m m )	M in floor space m m
630 (8 Persons)	1.0	1400*1100*2400	800*2100	2200*1600	4100	1500	2700	16	60
	1.5				4200	1600		24	75
	1.75				4250	1700		30	90
800 (10 Persons)	1.0	1400*1350*2400	800*2100	2200*1800	4100	1500	2700	16	60
	1.5				4200	1600		24	75
	1.75				4250	1700		30	90
1000 (13 Persons)	1.0	1600*1500*2400	900*2100	2400*1900	4100	1500	2700	16	60
	1.5				4200	1600		24	75
	1.75				4250	1700		30	90
1250 (16 Persons)	1.0	1800*1500*2400	1100*2100	2750*2000	4400	1500	2700	16	60
	1.5				4500	1600		24	75
	1.75				4600	1700		30	90
1600 (21 Persons)	1.0	1900*1800*2400	1100*2100	2850*2200	4400	1500	2700	16	60
	1.5				4500	1600		24	75
	1.75				4600	1700		30	90




4. MRL elevator layout editing :

The main problem of the MRL elevator is how to arrange the key components such as the cage, the main engine, the control cabinet and the speed limiter in the normal elevator shaft without the condition of the machine room. If the machine room is cancelled, the problem will be solved by enlarging the cross-section area of the well or increasing the top level of the well to solve the problem. The main way to solve this problem is to use the well space to develop special elevator parts and develop new driving mode.








5. The layout of the well path common in the MRL elevator is as follows:

? Host place: it is a specialized design and manufacturing sector disc host, can make it in the top shaft between cage and shaft wall, and the control cabinet with the top layers of the door into an organic whole. The main advantage is that the main engine and the speed limit device are the same as those of the machine roomless elevators, and the control cabinet is convenient for debugging and maintenance. The main disadvantage is that the rated load, rated speed and maximum elevation of the elevator are restricted by the size of the main engine.

? Host: this scheme is to place the drive host in the bottom hole, and the control cabinet is hung between the cage and the well wall of the bottom hole. Its greatest advantage is that the rated load, rated speed and maximum lifting height of the elevator are not limited by the size of the main engine. The main disadvantage is that the main engine and the speed limit are different from ordinary elevators, so the design must be improved.

? The host is placed in the cage: this scheme puts the host on the top of the car, and the control cabinet is placed on the side of the cage. This arrangement is more than the number of cables.

? The host and control cabinet are placed in the opening space of the sidewall of the well channel: the plan is to place the host and control cabinet on the side wall of the top well to reserve the opening. Its biggest advantage is that can increase the lift rated capacity, rated speed and maximum hoisting height, available with a choice of the host and ordinary elevator use speed limiter, and installation and maintenance and emergency turning operation is convenient; The main disadvantage is that it is necessary to increase the thickness of the lateral wall of the opening well, and to install the access door on the outside of the hole.




If you are interested in any of MRL lift or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.